DC to AC Inverter Module 24V 100W

DC to AC inverter module designed to convert direct current from a 24V power source into alternating current using an external transformer. The module generates a square wave signal with a frequency of 50 Hz and is used in inverter circuits and power conversion systems.

The board does not stabilize the output voltage. The output level depends directly on the input voltage and the characteristics of the connected transformer.

Technical Specifications

• Module type: DC to AC inverter
• Input voltage: DC 24V (operating range typically 18–30V)
• Output signal: AC square wave
• Output frequency: 50 Hz
• Rated output power: 100 W without additional cooling
• Maximum power: up to 200 W with forced cooling
• Protection: reverse polarity protection on input
• Low voltage protection: supported

Installation Notes

• Output voltage depends on the input voltage and transformer ratio
• Transformer power rating should exceed required output power
• Example: for 100 W output a transformer rated about 150 W is recommended
• Transformers with high leakage (such as microwave oven transformers) are not recommended
• High-frequency or unsuitable transformers should not be used
• If voltage drops under load, check:
• transformer power rating
• wire thickness
• battery capacity